Altiux Innovations > Case Studies > Reduce the Energy Consumption of Air Cooled Condensers

Reduce the Energy Consumption of Air Cooled Condensers

Altiux Innovations Logo
 Reduce the Energy Consumption of Air Cooled Condensers - IoT ONE Case Study
Technology Category
  • Platform as a Service (PaaS) - Data Management Platforms
Applicable Industries
  • Metals
Applicable Functions
  • Process Manufacturing
Use Cases
  • Building Energy Management
Services
  • Data Science Services
About The Customer
Our client is an INR 20 billion India based Steel and Cement manufacturing unit. The steel producing arm has a capacity of 1.25 million tonnes per annum. The steel plant also includes a 235 MW captive power generation unit as part of an integrated setup.
The Challenge

Altiux's client organization is at the forefront of technology adoption in its manufacturing processes and had already implemented advanced control systems. However operating expenses still remained on the higher side due to inefficiencies in certain processes which required manual intervention. The challenge for Altiux was to understand the nature and root causes of these inefficiencies and make recommendations for reducing the operating expenses. Our observation was that data was being generated with a millisecond level resolution and hundreds of simultaneous fluctuations made it near impossible for the operators to make optimal control decisions consistently. As significant investments had already been made in the instrumentation of the operational equipment, the management was hesitant to make modifications to existing systems and processes. Altiux was asked to make recommendations such that it could blend in with existing processes and additional capital expenditure or staff retraining was not required. The Air Cooled Condenser system at the client's captive power plant was operated using a series of VFD fans. The rotational speed of these fans were being manually set from the control centre, based upon the experience of the operator. Moreover the fans were being operated in different speeds, with fans closer to the turbine operating at near full speed. Thus the first phase of Altiux engagement involved optimization of the captive power plant's steam cooling subsystem.

The Solution

To address the challenges faced by our client, Altiux initially engaged in a four-week consulting engagement. The first step of this engagement was to understand the data, which had been captured by the historian systems, in the context of the client's operational process. It involved several visits to the client location and interactions with their operators, plant managers and business leads. The next step was to extract and clean large volumes of data from the existing systems and establish a relationship between the operating speed of individual fans and their respective power consumption. Altiux leveraged their machine data analysis TM platform, called IoTelligence, in order to visualize the complex multi-dimensional data and it yielded immediate benefits. This enabled Altiux's data scientists to build a model replicating the energy consumption of the ACC fan array at different speed settings. The model was optimized for cumulative energy consumption while maintaining the minimum cooling requirements for the exhaust gases. In the next step, these results were validated by measuring the actual energy savings obtained using the optimal fan speed settings that were recommended by the model.

Data Collected
Energy Consumption Rate, Fault Detection, Process Procedure, Production Efficiency, Speed
Operational Impact
  • [Efficiency Improvement - Issue Response]
    The Altiux solution did not require additional capital expenditure. It was completely non-invasive and did not require any changes to their existing systems or processes. In case of a fan failure, the cooling load could be easily distributed among the oth
  • [Efficiency Improvement - Production Uptime]
    The ability to predict potential fan malfunctions led to reductions in unplanned shutdown of the plant and reduced the risk in operations.
  • [Cost Reduction - Environment Pollution]
    By reducing the carbon footprint in the ACC system our client was able to get closer to its annual carbon reduction target.
Quantitative Benefit
  • The client was able to achieve ~18% energy savings for running their Air Cooled Condensing system, translating to about 3000 units of saving on a daily basis.

  • Indirect Operational Cost Saving - The optimal fan speeds recommended by the Altiux engine was much lower than the maximum speed. This leads to reduced wear and tear of the fan's motors and improves their effective lifetime.

Case Study missing?

Start adding your own!

Register with your work email and create a new case study profile for your business.

Add New Record

Related Case Studies.

Contact us

Let's talk!
* Required
* Required
* Required
* Invalid email address
By submitting this form, you agree that IoT ONE may contact you with insights and marketing messaging.
No thanks, I don't want to receive any marketing emails from IoT ONE.
Submit

Thank you for your message!
We will contact you soon.