SmartDataSystem > Case Studies > Optimizing Energy Utilization (Barcelona City Council)

Optimizing Energy Utilization (Barcelona City Council)

SmartDataSystem Logo
 Optimizing Energy Utilization (Barcelona City Council)   - IoT ONE Case Study
Technology Category
  • Functional Applications - Remote Monitoring & Control Systems
  • Networks & Connectivity - Gateways
  • Platform as a Service (PaaS) - Data Management Platforms
  • Sensors - Utility Meters
Applicable Industries
  • Cities & Municipalities
Applicable Functions
  • Facility Management
Use Cases
  • Building Energy Management
The Customer
City of Barcelona
About The Customer
The Barcelona City Council.
The Challenge

The Barcelona City Council manages about 2000 municipal buildings and as expected the energy expenditure is very high. Hence, the objective was to closely monitor and control how these buildings are consuming and, in some cases, producing energy. Specifically, the aim was o determine the degree of utilization of energy produced by solar thermal systems in multifamily buildings. The project consisted on controlling and monitoring 28 solar thermal systems. It was divided into three phases; a pilot phase to monitor 4 initial sites, a second phase where 16 more were added, and a third phase where the final 8 were included.

The Solution

On the pilot phase, the main controller, responsible for managing the system operation, was monitored to analyse the actions it was executing on a regular basis. Given that the main controller did not allow external communication, a new set of temperature sensors and energy meters were deployed in order to measure the energy produced by the system. This equipment then transmits collected data to the Smart Data System monitoring platform through a gateway that provides connectivity. For the subsequent phases, the main controller was replace by the SH2WEB24, manufactured by CARLO GAVAZZI , an enhanced version of the controller that not only allowed the Smart Data System platform to perform monitoring tasks, but also enable it to send instructions to the devices. With this new controller, existing devices can now be connected directly. The final step was to analyse all collected data and then produce reports that helped improving the system setup, detect faulty equipment, and send alerts when something abnormal happened.

Data Collected
Energy Consumption Rate, Energy Production, Fault Detection, Solar Power, Temperature
Operational Impact
  • [Efficiency Improvement - Maintenance]
    The system helped detect faulty equipment, send alerts and facilitate predictive maintenance.
Quantitative Benefit
  • 95% system uptime.

  • 50% faster fault response time.

  • 1500 Euros in production related cost savings per year.

Case Study missing?

Start adding your own!

Register with your work email and create a new case study profile for your business.

Add New Record

Related Case Studies.

Contact us

Let's talk!
* Required
* Required
* Required
* Invalid email address
By submitting this form, you agree that IoT ONE may contact you with insights and marketing messaging.
No thanks, I don't want to receive any marketing emails from IoT ONE.
Submit

Thank you for your message!
We will contact you soon.