SLM Solutions Group AG > Case Studies > 3D-Printing of Tooling Parts

3D-Printing of Tooling Parts

SLM Solutions Group AG Logo
 3D-Printing of Tooling Parts  - IoT ONE Case Study
Applicable Industries
  • Equipment & Machinery
Applicable Functions
  • Product Research & Development
Use Cases
  • Additive Manufacturing
Services
  • Hardware Design & Engineering Services
The Customer
About The Customer
ABB is a global leader in power and automation technologies. Based in Zurich, Switzerland, the company employs 145,000 people and operates in approximately 100 countries. 
The Challenge

Selective Laser Melting (SLM), an additive manufacturing technology, can be used for the production of tooling components with conformal cooling channels. ABB OY, Drives and Controls, was able to tremendously reduce the cycle time for a cabling grommet due to a redesign and optimization of a tooling insert. The optimized geometry of the part not only reduces the cycle time but also leads to less scrap parts in production.

The aim of the case study of implementing conformal cooling for this insert was to improve the efficiency of the production and to increase the product quality resulting in less defective products.

The Solution

For the study, six different channel profiles were designed for the tooling insert, including one resembling a part with conventional cooling to provide a comparison to conventional manufacturing. The channel profiles were optimized for the SLM technology taking into account factors including the angles of surfaces facing down to reduce the need of supports, a minimum wall thickness between channels and the dimensions and shapes of the channels. Before building all the various cooling channel profiles, simulations for water flow and thermal conductivity were carried out and the parts already showed slightly different cooling behavior in the simulations.

The utilization of SLM leads to drastic reduction of cycle time and production cost. Achieving a reduction of the cooling time from around 30 seconds to approximately six seconds was able to reduce the cycle time from 60.5 seconds to 14.7 seconds by using the conformal cooling insert in the injection molding tool.

Operational Impact
  • [Efficiency Improvement - Quality Assurance]
    Less defective products due to more equal cooling on surface.
  • [Product Improvement - Flexibility]
    Cooling channels can be used for tempering according to application.
Quantitative Benefit
  • Cooling time of TPE is reduced 80% than with original insert.

  • Cycle time is more than 75% shorter than with original insert.

  • Savings in production time and cost.

Case Study missing?

Start adding your own!

Register with your work email and create a new case study profile for your business.

Add New Record

Related Case Studies.

Contact us

Let's talk!
* Required
* Required
* Required
* Invalid email address
By submitting this form, you agree that IoT ONE may contact you with insights and marketing messaging.
No thanks, I don't want to receive any marketing emails from IoT ONE.
Submit

Thank you for your message!
We will contact you soon.